Vehicle air dryer installation and maintenance

Installation

1. Installation location options : Keep away from heat sources, good ventilation, close to the gas system in the first use of a drying gasholder tank top should stay out 0 ~ 50mm space, for the replacement of the desiccant. 　
　
2. Installation : vertical, sewage (gas) export down, inclination should not exceed the requirements of the products. 　
　
3. From the air compressor to the pipe length dryer should demand, Dryer is designed to guarantee entrance of the air temperature comply with the request for information. To Thermal generally recommends Φ181.5 the metal tube. Automobile exhaust air compressor temperature, According QC/T29078-92 technical requirements of 200 ℃ meet quality standards. If it is brass, pipe length generally not less than six meters, so metal pipes, should be more than five meters. Summary judgment dryer inlet temperature method : vehicles with the normal running speed, gas aeration system, exhaust 20 minutes later, without gloves, shook hands dryer entrance of the tube, if not hot, the temperature is 65 ℃; If the hot temperature is over 65 ° C, measures should be taken to lower the temperature,：　　(1) enhanced tubes; 　　(2) in the dryer air compressor to increase Pipeline a two-3L cylinders

Maintenance

Dryer renewable must be able to ensure that its performance. Dryer existing two angry road again :
　　　　　
1. Renewable cylinders; 2. Automatic regeneration device. 　　

We need to be aware : Whatever angry road again, we have to constantly re-way flow of angry, desiccant use after a certain period to be replaced. When replacement? According to the product description, the approach recommended time, the open reservoir near the dryer on the inflator valve. Observation released after several changes of water, if the first time last year, indicating a change of the desiccant. Desiccant for good, we have to try hermetic properties to meet the requirements before they can track.